MACHINE CONDITION
- The machine is in the stopped state,
- JOG works, otherwise manual rotation.
MATERIAL NEED
consumable
- Clean and dry cloths.
special tool
- Tool (1).
PROCEDURE
Disassembly
1. Place the tool (1) head (2) on the transfer arm (A). - Keep the fork of the head (2) up.
2. Place the foot (3) on the screw (4).
3. Lock the tool (1) with the bolt (5).
- Bolt (5) must come into contact with bolt (4).
4. Turn the lever (6) clockwise to disengage the cam (8) bearing (7).
- Never screw the tool (1) up to the maximum point.
5. Remove the screws (9) and washers (10).
6. Remove the transfer arm (A).
7. Turn the handle (6) counterclockwise until the springs (11) are completely loose.
Loosen the
8. (5) screws.
9. Remove the tool (1).
Attaching
1. Attach the tool (1) to the transfer arm (A) as described in the removal procedure.
2. Position the transfer arm (A).
3. Install the screws (9) and washers (10).
4. Remove the tool (1).
